Second that, good deal.
Carbon-15 doesn't use full milspec parts, so you might have trouble down the line. Plus, if the AR-15 in M4 config with or without a quad rail is too heavy for you, uh, you got problems.
Bushmaster AR
Moderator: Hitoru
17 posts
• Page 2 of 2 • 1, 2
Re: Bushmaster AR
by Tarkan » Tue Oct 28, 2008 3:57 am
I'd whore myself out just one more time if I knew who to screw to get out of this grind.
-
Tarkan - BFCus Regularus
- Posts: 6027
- Joined: Thu Mar 25, 2004 3:57 am
- Location: Texas
Re: Bushmaster AR
by Idaho Corsair » Tue Oct 28, 2008 7:12 pm
you got a VERY good deal!
You might want to upgrade the extractor spring and add a "black o-ring" under the extractor claw. That's the only issue Bushmaster's consistently have which results in annoying failures to extract/double feeds. It happened to me. Also check to make sure the gas key is properly staked. Otherwise it's a solid gun. My bushmaster gets right at 1" groups at 100 yards with a 4x ACOG. There is no substitute for a real ACOG they're worth every penny.
nice gun! now go enjoy it! :)
You might want to upgrade the extractor spring and add a "black o-ring" under the extractor claw. That's the only issue Bushmaster's consistently have which results in annoying failures to extract/double feeds. It happened to me. Also check to make sure the gas key is properly staked. Otherwise it's a solid gun. My bushmaster gets right at 1" groups at 100 yards with a 4x ACOG. There is no substitute for a real ACOG they're worth every penny.
nice gun! now go enjoy it! :)
Molon Labe!
- Idaho Corsair
- Posts: 9
- Joined: Thu Apr 10, 2008 5:04 pm
- Location: Idaho
17 posts
• Page 2 of 2 • 1, 2
Return to Guns, Knives, Gear, Tech and ....STUFF!!!
Who is online
Users browsing this forum: No registered users and 30 guests