DPx HEST II Proto Sneak Preview At IWA

questions, comments , film clips and pictures on guns and weapons and HEST.

Moderator: Hitoru

DPx HEST II Proto Sneak Preview At IWA

Postby RYP » Fri Mar 11, 2011 4:12 pm

We have some protos at Nurenburg if you are there. Will send pics

http://dpgear.com/wp-content/uploads/20 ... EST-II.jpg
User avatar
RYP
Ownerus Websiteus Authorus
 
Posts: 27774
Joined: Thu Mar 25, 2004 3:42 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby diamondcutter13 » Fri Mar 11, 2011 9:21 pm

looks good but I was hoping the wire breaking notch would disappear or move. I never use it for wire breaking and it catches on hide all the time when I use it for skinning.
Tacuero ceruisa, vigilate hoc
User avatar
diamondcutter13
BFCus Regularus
 
Posts: 377
Joined: Fri Sep 14, 2007 11:14 am
Location: The Great White North, Loyalist Township.

Re: DPx HEST II Proto Sneak Preview At IWA

Postby RYP » Sun Mar 13, 2011 7:38 am

Good point. What if you open a beer AND had to break though a chain link fence before you had to skin your kill?? You like it choiless?
User avatar
RYP
Ownerus Websiteus Authorus
 
Posts: 27774
Joined: Thu Mar 25, 2004 3:42 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby diamondcutter13 » Sun Mar 13, 2011 11:31 pm

beer opener has got lots of use, pry bar used a few times, wire breaker not at all. It just gets in the way so for me no choil is the way to go. I always carry a leatherman or gerber type tool anyway so I cut wire with that.

Drinking a brew, cutting through a fence, skinning. Sounds like a tool custom made for poaching!
Tacuero ceruisa, vigilate hoc
User avatar
diamondcutter13
BFCus Regularus
 
Posts: 377
Joined: Fri Sep 14, 2007 11:14 am
Location: The Great White North, Loyalist Township.

Re: DPx HEST II Proto Sneak Preview At IWA

Postby jacktrades_nbk » Tue Mar 22, 2011 12:44 pm

any news, specs, pics with the HEST II proto ?
DPx Gun Club\Tribe member
User avatar
jacktrades_nbk
 
Posts: 29
Joined: Sat Feb 05, 2011 8:08 pm

Re: DPx HEST II Proto Sneak Preview At IWA

Postby JamesInTheWorld » Wed Mar 23, 2011 11:13 am

Nice RYP!

Where will they be made?


~JITW
International Civilian Contractor Jobs
High Paying International Jobs
Iraq - Afghanistan - Asia - Europe
www.CivilianContractorJobs.com
User avatar
JamesInTheWorld
I HOPE YOU GET HIT BY A BUS
 
Posts: 7924
Joined: Sun Dec 18, 2005 9:58 am
Location: My Job is More Interesting Than Your Vacation

Re: DPx HEST II Proto Sneak Preview At IWA

Postby RYP » Wed Mar 23, 2011 1:53 pm

in Somalia where the internet is as fast as a dead man in a rusty wheel chair. When I get some connection speed will post.
User avatar
RYP
Ownerus Websiteus Authorus
 
Posts: 27774
Joined: Thu Mar 25, 2004 3:42 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby Paul RevEar » Wed Mar 23, 2011 9:20 pm

I coulda sworn I saw a proto pic of a Hest II with a flat end on the blade instead of pointed... I assumed it was for chiseling, that would be cool too!

Maybe it was a drunken dream, can't remember.
User avatar
Paul RevEar
 
Posts: 21
Joined: Sun Feb 06, 2011 4:27 pm

Re: DPx HEST II Proto Sneak Preview At IWA

Postby RYP » Thu Mar 24, 2011 5:44 am

That is the Beta Titanium Non Ferrous version
User avatar
RYP
Ownerus Websiteus Authorus
 
Posts: 27774
Joined: Thu Mar 25, 2004 3:42 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby skinz0021 » Mon Mar 28, 2011 4:54 am

Why a single hole in the pry bar end?

I use both hole for a lanyard....
RYP-
working this thread harder than a two dollar hooker on shore leave is not going to speed up the delivery
User avatar
skinz0021
 
Posts: 38
Joined: Tue Feb 08, 2011 5:57 am
Location: Hillbillyville, ARkansas

Re: DPx HEST II Proto Sneak Preview At IWA

Postby JamesInTheWorld » Mon Mar 28, 2011 7:14 am

RYP wrote:That is the Beta Titanium Non Ferrous version


Haaa haaaa... You used to make fun of people who would buy anything Titanium




~JITW
International Civilian Contractor Jobs
High Paying International Jobs
Iraq - Afghanistan - Asia - Europe
www.CivilianContractorJobs.com
User avatar
JamesInTheWorld
I HOPE YOU GET HIT BY A BUS
 
Posts: 7924
Joined: Sun Dec 18, 2005 9:58 am
Location: My Job is More Interesting Than Your Vacation

Re: DPx HEST II Proto Sneak Preview At IWA

Postby RYP » Tue Mar 29, 2011 3:41 pm

that was before Beta Titanium and a new sandwiched Titanium/Stainless product was shown to me. We all evolve. :))
User avatar
RYP
Ownerus Websiteus Authorus
 
Posts: 27774
Joined: Thu Mar 25, 2004 3:42 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby Iyyob » Wed Mar 30, 2011 6:43 pm

those black scales look so great, only thing is i wont be able to do any custom dye jobs :(
Iyyob
 
Posts: 10
Joined: Thu Mar 17, 2011 5:23 am

Re: DPx HEST II Proto Sneak Preview At IWA

Postby JamesInTheWorld » Thu Mar 31, 2011 8:33 am

RYP wrote:that was before Beta Titanium and a new sandwiched Titanium/Stainless product was shown to me. We all evolve. :))


So now you can't make fun of me for my Titanium Fleshlight


~JITW
International Civilian Contractor Jobs
High Paying International Jobs
Iraq - Afghanistan - Asia - Europe
www.CivilianContractorJobs.com
User avatar
JamesInTheWorld
I HOPE YOU GET HIT BY A BUS
 
Posts: 7924
Joined: Sun Dec 18, 2005 9:58 am
Location: My Job is More Interesting Than Your Vacation

Re: DPx HEST II Proto Sneak Preview At IWA

Postby coldharvest » Thu Mar 31, 2011 12:46 pm

JamesInTheWorld wrote:
RYP wrote:that was before Beta Titanium and a new sandwiched Titanium/Stainless product was shown to me. We all evolve. :))


So now you can't make fun of me for my Titanium Fleshlight


~JITW

I bet you've still worn a couple of them out.
I know the law. And I have spent my entire life in its flagrant disregard.
User avatar
coldharvest
Abdul Rahman
 
Posts: 25677
Joined: Thu Mar 25, 2004 2:36 am
Location: Island of Misfit Toys

Next

Return to Guns, Knives, Gear, Tech and ....STUFF!!!

Who is online

Users browsing this forum: No registered users and 10 guests