questions, comments , film clips and pictures on guns and weapons and HEST.
Moderator: Hitoru
by nowonmai » Mon Oct 24, 2011 6:23 pm
Helmschmied wrote:I received my 2.0 almost exactly ten months after I ordered it. Unfortunately, blade play/rattling developed after just a couple of hours of playing with it. Should I take it apart and try to bend the lock bar a bit tighter? Otherwise it seems like a fantastic little knife.
Try and avoid the ribs in future.
-
nowonmai
- BFCus Regularus
-
- Posts: 11542
- Joined: Tue Feb 08, 2005 8:52 pm
by RYP » Tue Oct 25, 2011 10:35 am
give it a couple of weeks to see if it settles in. If not we are happy to look at it and make it right at no charge
-
RYP
- Ownerus Websiteus Authorus
-
- Posts: 27774
- Joined: Thu Mar 25, 2004 3:42 am
by sdg » Thu Nov 03, 2011 10:26 pm
RYP wrote:you get all the free pivot screws you want. But that is something worth looking into. Also I thumb tighten mine.
As for the 1.0 clip fitting the 2.0 It should BUT lemme check.
You should consider making the threaded portion of the pivot screw longer. It looks as if it could be almost twice as long before it starts running into anything. It would make it pretty tough to lose the screw as it would hang out quite a bit before actually falling off.
-Steve
-
sdg
-
- Posts: 51
- Joined: Wed Dec 08, 2010 5:57 am
- Location: CA Central Coast
by RYP » Sat Nov 05, 2011 1:44 pm
never had one fall off yet. But good idea
-
RYP
- Ownerus Websiteus Authorus
-
- Posts: 27774
- Joined: Thu Mar 25, 2004 3:42 am
Return to Guns, Knives, Gear, Tech and ....STUFF!!!
Who is online
Users browsing this forum: No registered users and 45 guests